A bike park wash station is how busy MTB venues manage muddy bikes without bottlenecks, trail damage, or hand-hose chaos. Bike parks manage muddy bikes by installing a fixed, self-contained washing point at the trailhead or car park: riders place the bike, the machine cleans it in roughly a minute, and the run-out water is contained rather than washing back onto the trails. The result is faster turnaround, cleaner bikes, and less grit carried into uplift queues and vehicles. cycleWASH builds exactly this — professional bicycle washing machines, Made in Germany — for high-throughput sites.
Why mud is an operational problem, not just a mess
At a trail centre, mud is a recurring cost. Loose hoses flood paths, create slip hazards, and waste water. Riders queue. Drivetrains wear faster when grit is rubbed in by hand. And uncontained run-off carries sediment into drains and onto surfaces you are trying to protect. A purpose-built wash point replaces all of that with one predictable station.
What a bike park wash station does
A cycleWASH machine washes a full bike in about a minute, hands-free. That throughput matters on weekend peaks and event days, when dozens of riders finish within the same window. Because the wash is enclosed and controlled, water use is managed and the wash area stays defined — no spray drift across the car park, no mud tracked indoors.
cycleWASH is built by CW Cleaning Solutions GmbH in Köln, with roughly ten years in the field. The track record is concrete: 32 patents, 350+ units sold, more than 1 million bikes washed, deployed across 24+ countries. Equipment is DEKRA/CE certified, so it meets the standards a public-facing venue needs.
Matching a machine to your site
Not every trail centre needs the same footprint. Smaller venues, club sites, and seasonal parks often start with the Mini Station at EUR 13,990 — a compact, entry wash point that handles real mud volume. Sites wanting more durability and capacity move up the range:
- Mini Basic — EUR 24,990
- Mini Platinum — EUR 29,990
- Pro — from EUR 42,000
For destination resorts running multiple trailheads or an uplift operation, OASIS provides a full-service installation, with LuftWash drying and Care products available to complete the wash-to-ready cycle.
The numbers for an operator
A wash station is a revenue and retention tool, not just a utility. cycleWASH equipment is available on financing of roughly EUR 280–480/month over 60 months, and typical payback lands in 12–24 months through pay-per-wash income, longer rider dwell time, and the on-site spend that follows. For parks running on tight seasonal margins, that payback window is the case for installing rather than deferring.
Specifying and rolling out
Bike parks rarely buy in isolation. cycleWASH works through a network of regional partners who handle siting, installation, and local support — useful when you need a machine placed near power and drainage and serviced through a season. That local layer keeps a public wash point running on the days it matters most.
Protecting the trails you built
The trail surface is the asset. Every bike that leaves clean is a bike that carries less grit into the next vehicle, the next workshop, and the next ride. Containing wash water at a fixed station keeps sediment out of the wider site. Over a season, that is measurable wear avoided — on trails, on bikes, and on your team's time.
Ready to spec a bike park wash station? The Mini Station starts at EUR 13,990, and the current demo-clearance offer runs to 15 June 2026 — a direct route to equip your site before the season ramps. See the Mini Station or reach a regional partner to plan your installation.